Catalog in PDF:
Catalog in PDF:
We draw your attention to the fact that we only carry out the design, sale, installation and commissioning of systems.
Over 50 years of Bently Nevada history, more than one million equipment protection systems have been installed worldwide.
The Bently Nevada (General Electric) 3500 Vibration Monitoring Systems, consisting of eddy current sensors, accelerometers, velomiters, chassis, monitors, cables, as well as all software solutions developed by the company, allow you to protect machinery from serious failures and breakdowns.
3500 Bently Nevada (General Electric) systems help to collect data on all critical parameters of equipment (compressors, pumps, turbogenerators) both before and after maintenance, make it possible to make the right optimal decision that will reduce material costs for repairs and maintenance.
Given the complexity of modern production, the use of a large number of critical equipment in production, the unplanned shutdown of which leads to a failure in the operation of the entire enterprise, which entails loss of profit, unplanned repair and maintenance costs. Therefore, any mechanical equipment must operate within or above design capacity, but reliably and predictably.
To solve these problems, vibration monitoring systems are designed that allow solving a number of critical problems of any enterprise:
-increasing the time intervals between the planned works according to the regulations;
-reduction of terms for routine maintenance;
-increasing the service life of equipment (with timely detection of faults);
- minimizing planned equipment shutdowns;
- ensuring the protection of the main machinery from serious mechanical failures;
-Reducing the amount of maintenance work.
Data collection with vibration monitoring systems with portable vibration analyzers
SCOUT
Portable device SCOUT is designed to collect and analyze data taken from sensors and has 2 or 4 measurement and balancing channels in two planes. For quick diagnosis and correction of dynamic imbalance, SCOUT provides balancing functions.
The device is very accurate in measurements, easy to maintain, has a large memory of measured data. SCOUT
has ASCENT software, which allows you to load more than 1000 layouts of various types of units and more than 300 adjustable parameters into the device’s memory, a database with more than 30,000 bearings, shaft unit vectors and allows you to display Bode plots.
SCOUT Specifications:
- LCD display with backlight and high resolution 480x320 pix.
- the ability to record and remove data up to 4 channels (depending on configuration)
- support for DC sensors (accelerometer, vibration velocity, vibration displacement)
-DC range 0-20V, -10V to 10V, -20V to 0V
- sensor excitation current 0 mA or 2.2 mA
- spectrum resolution 12800 lines
- 1 GB internal memory
- built-in USB port for data transfer to external sources
-laser speed/phase sensor to measure rotation speed.
-special mode of using the Keyphasor sensor as a speed sensor.
- Keyphasor sensor threshold 13V+/-1V
- balancing: 2 planes, 2 sensors (SCOUT100), 2 planes and 4 sensors (SCOUT140)
- speed measurement range : 30-60000 rpm
- measurement type: vibration acceleration, vibration velocity, vibration displacement
- spectrum display from 25 to 40000 Hz
- application at temperatures from -10 to +50 C
- Battery : Li-Ion, 7.4 V. 4500 mAh
- possibility of use in hazardous areas CSA class 1, division 2 (groups A, B, C, D)
The functions and capabilities of the SCOUT vibration analyzer differ depending on the configuration ( SCOUT, SCOUT100, SCOUT140)
The device has the most advanced functions SCOUT140. Differs in both inputs (2 or 4 channels, connection of three-axis sensors, sensors with 4-20 mA outputs, number of planes / sensors (4). The kit also has a laser tachometer. The kit includes a carrying bag, battery pack, power adapter AC adapter, DC adapter (car), sensor bracket, accelerometers, accelerometer magnetic mount, cables, reflective tape.
SCOUT 220-IS
It is a portable data collector designed to work in explosive environments. It is a compact, lightweight, rugged device that allows you to collect data on the condition of the equipment (shaft vibration, bearings, body vibration), and then upload it to the System 1 Evolution analysis and processing system for detailed analysis. The device has two data acquisition channels (vibration displacement, vibration velocity, vibration acceleration). Scout 220-IS supports the following types of sensors: eddy current 3300 XL, accelerometers, velometres. The collection system consists of a Scout 220-IS and an ATEX explosion-proof industrial smartphone. The smartphone runs on the Android platform, on which you can view vibration data, take photos, send text messages, e-mails, etc. The Scout 220-IS communicates with a smartphone via Bluetooth, which in turn transmits data to the System 1 Evolution software using the WI-FI protocol or via a cellular connection. A complete analogue of the Scout 220-IS is the Commtest portable assembler, but without hazardous area certification, but at a lower cost. Ideal for industries where there are no hazardous areas.
Specifications:
- number of channels - 2
- frequency max 40 kHz
- polling channels speed - manually
- type of channels: vibration displacement, vibration velocity, vibration acceleration
-type of sensors supported: eddy current, accelerometers, velometers
- data output: System 1 Evolution
- phase channel: yes
-protection relay(response< 100ms): no
- Modbus output: no
- 4-20 mA output: no
Didn't find the right equipment?
Do not worry!
You can buy more from us than you see on the site!
Email us: sales@esp314.com
Or call: +7 495 118 36 52
Also you can directly call our manager Oleg: +7 916 365 49 31
He will gladly help you!
